|
|||
|
|
|
|
_30x30.png)
| General | Specification | ||||||
|---|---|---|---|---|---|---|---|
| Interface/gender | 2.2-5 Male, torque type | ||||||
| Cables supported1 | JMA Wireless | JMA12-50 | Eupen | EC4 | |||
| CommScope | LDF4 | Leoni Flexline 1/2"R | |||||
| LDF4RK | LS/Superior Essex | HFC 12D | |||||
| LDF4 RN | HFAC 12D | ||||||
| RFS | LCF12 | Hansen | RF5012 | ||||
| LCF12-50JL | RF5012Z | ||||||
| NK Draka | RFA1200 | Belden | RA500 | ||||
| Rosenberger | SL 1/2" R | RA500R | |||||
| Wireless Supply | WS12 | ||||||
| Weight |
|
||||||
| Tools required | JMA part number | Comment |
|---|---|---|
| Cable preparation | SP-1/2-LDF4D | "U" bit |
| Connector compression | HCG-FRAMESET-1/2, HCG-CC | Insert D |
| Torque wrench | TQ-916-F2.2 | 2.2 lbf·ft | 2.98 N·m |
| Frequency band | VSWR | Return loss (dB) |
|---|---|---|
| 555–1000 MHz (0-1 GHz) | 1.02 | 40 |
| 1000–2700 MHz (1-2 GHz) | 1.03 | 38 |
| 2700–3800 MHz (2-4 GHz) | 1.05 | 30 |
| 3800–6000 MHz (4-6 GHz) | 1.08 | 26 |
| Electrical | Specification | Comment |
|---|---|---|
| Connector impedance | 50 ohm | |
| Operating frequency band | DC–6 GHz | |
| 3rd order IMD dynamic, (PIM) | -161 dBc, typical | IEC 62037-2 |
| DC test voltage | 2500 V | |
| Center contact resistance | ≤1.0 milliohm | |
| Outer contact continuity | 1.0 milliohm max. | |
| Average power | 600 W @ 900 MHz | |
| Peak power, max. | 15 kW | |
| Insertion loss, typical | 0.05 dB | Per connector |
| Shielding effectiveness | < -120 dB | @ 0-1 GHz |
| Mechanical | Specification | Comment |
|---|---|---|
| Pull force combined | 1.1 kN | > 250 lb | Cable limited |
| Cable retention torque | 6.7 N·m | 5 lbf·ft | Cable limited |
| Interface durability | 100 cycles | IEC 61169-4:9.5 |
| Environmental | Specification | Test |
|---|---|---|
| Operating temperature | -55 °C to +85 °C (-67 °F to 185 °F) | |
| Storage temperature | -55 °C to +85 °C (-67 °F to 185 °F) | |
| Accelerated UV | 1000 hr | ASTM G154 |
| Immersion test method | Mated & unmated, IP68 | IEC 60529:2001 & ANSI/SCTE 60 |
| Water jetting test method | Mated & unmated, IP66 | IEC 60529:2001 |
| Mechanical shock test method | Pass | IEC 60068-2-27 |
| Thermal shock test method | Pass | IEC 60068-2-14 |
| Vibration test method | 100 m/s2, 2 Hz to 200 Hz | IEC 61169-1:2003 |
| Corrosion test method | 1000 hr | IEC 60068-2-11 |
| 1For cable types not listed, please contact JMA Technical Support. |
| ©2022 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, and logos are trademarks™ or registered® trademarks of their respective holders. All specifications are subject to change without notice. +1 315.431.7100 customerservice@jmawireless.com |
|