UPL-4MT-12

4.3-10 Male Torque Connector for 1/2" Plenum Cable

General Specification
Interface/gender 4.3-10 Male, torque type    
Cables supported1 Manufacturer P/N Manufacturer P/N Manufacturer P/N
JMA Wireless JMA12P-50 RFS ICA12-50JPL Wireless Supply 12/WP
CommScope HL4RPV-50 ICA12-50JPLB Rosenberger RLCX-SL012R
HL4RPV-50B ICA12-50JPLR Eupen EC4-50PL
HL4RPV-50R ICA12-50JPLW Belden RA500P
AL4RPV-50 ICA12-50JPLLR Acome HPL 50-1/2F
HUBER+SUHNER Sucofeed_1/2_PW ICA12-50JPLLW HPL 50-1/2F ALU
LS/Superior Essex LHF12DPV      
Weight 125.2 g | 0.276 lb
JMA Weather Protection System N/A
Tools required JMA part number Comment
Cable preparation SP-12PL-01 Bit “V1” all cables
Connector compression HCG-FRAMESET-1/2, HCG-CC Insert D
Torque wrench TQ-78-F8 8 lbf·ft | 10.85 N·m
Frequency band VSWR Return loss (dB)
555–1000 MHz 1.02 40
1000–2700 MHz 1.03 36
2700–3800 MHz 1.05 32
3800–6000 MHz 1.08 28
Electrical Specification Comment
Connector impedance 50 ohm  
Operating frequency band DC–6 GHz  
3rd order IMD dynamic, (PIM) -161 dBc, typical IEC 62037-2
DC test voltage 2500 V  
Center contact resistance ≤1.0 milliohm  
Outer contact continuity 1.0 milliohm max.    
Average power 600 W @ 900 MHz  
Peak power, max. 15 kW  
Insertion loss, typical 0.05 dB Per connector
Shielding effectiveness < -120 dB @ 0-1 GHz
Mechanical Specification Comment
Pull force combined .89 kN | > 200 lb Cable limited
Cable retention torque 6.7 N·m | 5 lbf·ft Cable limited
Interface durability 100 cycles IEC 61169-4:9.5
Environmental Specification Test
Operating temperature -55 °C to +85 °C (-67 °F to 185 °F)  
Storage temperature -55 °C to +85 °C (-67 °F to 185 °F)  
Accelerated UV 1000 hr ASTM G154
Immersion test method Mated & unmated, IP68 IEC 60529:2001 & ANSI/SCTE 60
Water jetting test method Mated & unmated, IP66 IEC 60529:2001
Mechanical shock test method Pass IEC 60068-2-27
Thermal shock test method Pass IEC 60068-2-14
Vibration test method 100 m/s2, 2 Hz to 200 Hz IEC 61169-1:2003
Corrosion test method 1000 hr IEC 60068-2-11
1For cable types not listed, please contact JMA Technical Support.

12/04/23